A PCRE internal error occured. This might be caused by a faulty plugin
 



======
TP-Link TL-WN725N version 2 in Raspbian 2014-01-07-wheezy-raspbian with kernel 3.10.25+ ======

<code>
wget -O 8188eu_31024_614.zip http://www.mendrugox.net/downloads/14
unzip 8188eu_31024_614.zip
sudo mv 8188eu.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless
sudo chown root:root /lib/modules/`uname -r`/kernel/drivers/net/wireless/8188eu.ko
sudo mv rtl8188eufw.bin /lib/firmware/rtlwifi/
sudo chown root:root /lib/firmware/rtlwifi/rtl8188eufw.bin
sudo depmod -a
sudo modprobe 8188eu
</code>
Edit /etc/netwok/interfaces like this and add your networks SSID and password:
<code>
auto lo

iface lo inet loopback
iface eth0 inet dhcp

allow-hotplug wlan0
auto wlan0

iface wlan0 inet dhcp
wpa-ssid "YOUR-NETWORK-SSID"
wpa-psk "YOUR-PASSWORD"
</code>
Then reboot your Raspberry Pi and it should connect to your wifi network automatically. You should see the wlan0 device when running ifconfig:
<code>
$ ifconfig
wlan0 Link encap:Ethernet HWaddr a0:f3:c1:14:53:ca
inet addr:192.168.2.121 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:96 errors:0 dropped:4 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:18513 (18.0 KiB) TX bytes:2746 (2.6 KiB)

</code>
=== sources : ===


http://burogu.makotoworkshop.org/index.php?post/2013/04/27/TL-WN725N-v2

http://tech.enekochan.com/2014/02/15/tp-link-tl-wn725n-version-2-in-raspbian-2014-01-07-wheezy-raspbian-with-kernel-3-10-25/

 
raspberry_pi/wifi.txt · Dernière modification: 2019/05/11 14:35 (modification externe)     Haut de page